Description
Specifications
- Mfr Part Number: FSP300AGB-B204
- Features:
- Complied with ATX12V standard
- Active Power Factor Correction (PFC) meet EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2011/65/EU & (EU)2015/863 (Restriction on Hazardous Substances)
- Remote ON/OFF function
- Internal 12V DC fan included
- Noise Killer
- AC input I/O switch is option
- Low noise and ripple
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by CB 62368 & 60950-1 2nd, EMC, UL TUV, FCC, CCC
- Input:
- Input Range: 90 ~ 264Vac (RMS), Full Range Input
- Frequency: 47 ~ 63Hz
- Input Current: Max 6A(RMS) @ 115Vac, 3A(RMS) @ 230Vac
- Inrush Current: No damage at cold start
- Output:
- Total Watts: 300W
- Output Voltage: +3.3V @ 19A, +5V @ 16A, +12V @ 24A, -12V @ 0.3A, +5VSB @ 2.5A
- +3.3V and +5V total output not exceed 105W
- Dielectric Withstand: Primary frame ground 1800V AC for 2 second
- Efficiency: Typical > 85%
- Rise Time: Less than 20ms
- Hold-up Time: 13ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 63Hz
- MTBF: A minimum predicted MTBF (MIL-HDBK-217) of 100,000 hours of continuous operation at +25°C
- Dimensions (WxLxH): 5.9 x 5.5 x 3.4 inch / 150.0 x 140.0 x 86.0 mm
- RoHS Compliant
Reviews
There are no reviews yet.