Description
Specifications
- Mfr Part Number: ATX-350PN-B204
- Features:
- Complied with ATX12V 2.0 standard
- High efficiency, Low noise and ripple and reliability
- Remote On/Off function
- Internal 12V DC 120mm fan included
- Noise Killer (Thermal fan speed control function)
- Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Approved by UL 60950, TUV, IEC 60950, NEMKO + CB Report
- With 20pin and SATA connectors
- Input:
- Input Range: 100 ~ 132 Vrms or 200 ~ 264 Vrms, manual selection
- Frequency: 47 ~ 63 Hz
- Input Current: 8A (RMS) @ 115Vrms/60Hz, 4A (RMS) @ 230Vrms/50Hz
- Inrush Current: 100A Max cold start, 120A Max warm start measured at 264Vrms/50Hz
- Output:
- Total Watts: 350 W
- +3.3V and +5V total output not exceed 130W
- When +3.3V is load to 22A, the +5V maximum load is 11.4A
- When +3.3V is load to 7.5A, the +5V maximum load is 21A
- +12V1, +12V2 total output not exceed 300W
- +3.3V, +5V, +12V1, and +12V2 total output not exceed 335W
- Dielectric Withstand: Input to frame ground 1800V AC for 1 second
- Insulation Resistance: 20 Meg. Ohm Min.
- Efficiency: 70% minimum measured at nominal AC main voltage with maximum load on all outputs
- Rise Time: Less than 20ms on all outputs
- Hold-up Time: 12ms minimum at 115V, 16ms minimum at 230VAC
- Power Good Signal: Power on delay time 100ms to 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Not exceed 3.5mA
- MTBF: 100,000 hours on maximum load at +25°C degree
- Dimension (WxLxH): 6 x 5.5 x 3.4 inch / 150 x 140 x 86 mm
Reviews
There are no reviews yet.