Fractal Design FD-FAN-VENT-HP12-PWM-W Venturi HP-12 120mm High Pressure PWM Fluid Dynamic Bearing White Radiator Optimized Computer Case Fan
$18.81
33 in stock
Description
Specifications
- Mfr Part Number: FD-FAN-VENT-HP12-PWM-WT
- Features:
- Featuring true FDB-bearings, providing silent operation coupled with a long lifespan
- Equipped with a counter-balanced magnet that reduces the axial tension on the bearing
- Features integrated vibration-dampening corners, made from solid high-quality synthetic rubber
- Dense, sturdy construction, made from high grade glass fiber reinforced thermoplastic polymer
- Fan geometry is optimized for high pressure, delivering high performance results in high restriction usage scenarios, such as in use with large dense heatsinks or water cooling radiators.
- Featuring PWM control with a very wide speed range, starting at only 400RPM (400 +/- 100 RPM), ideal for CPU heatsinks or radiators, where the motherboard can control the fan speed based on the CPU temperature. (HP PWM Version only)
- Aerodynamically shaped thin stator struts reduce noise and unwanted turbulence.
- Strategically placed notches on the blades further reduce and diffuse any humming noise produced when the blades pass the stator struts
- The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation
- Comes with a PWM Y-cable, for connecting additional fans to a single PWM header on your motherboard or PWM fan controller
- 140mm fans come with an additional set of vibration-dampening corners are included that lends compatibility with 120mm fan mounts (105mm screwspacing). This enables the use of 140mm fans on many CPU coolers.
- Available in 120mm and 140mm fan sizes
- Available in two color combinations, Black blades, black corners, dark grey (“Gunmetal”) frame and White blades, black corners, black frame
- Rotational Speed: 1800 RPM
- Acoustical Noise: 31.7 dBA
- Maximum Air Flow: 61.4 CFM / 104.3 m3/h
- Maximum Pressure: 2.3 mm H2O
- Actual Input Power: 1.0 W
- Maximum Rated Input Current: 0.2 A
- Nominal Input Voltage: 12V
- Minimum Startup Voltage: 6V
- Low PWM Speed:
- Speed: 400 RPM
- Static Pressure: 0.45 mm H2O
- Air Flow: 15.4 CFM / 26.2 m3/h
- Noise Level: < 10 dBA
- Screw Hole Pattern: 105 x 105 mm
- Connector: 4-Pin Fan Header
- Bearing: FDB
- Number of Blades: 7
- MTBF: 150,000 hours
- Cable length: 500 mm
- Cable Type: Braided All-Black Ribbon Wire
- Color: White
- Dimensions: 120.0 x 120.0 x 25.0 mm
- Weight: 179.0 g
- Package Contents:
- Venturi Series fan
- Screw pack with 4 metal screws
- 1->2 PWM Signal Splitter Cable
Additional information
| Weight | 0.49 lbs |
|---|---|
| Brand | Design, Fractal |
| UPC | 843276100209 |
| MPN | FD-FAN-VENT-HP12-PWM-WT |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.