Gigabyte Server R281-2O0 2U 26Bay Intel Xeon LGA3647 P0 C621 DDR4 26×2.5 inch SATA-SAS hot-swappable HDD-SSD bays Brown Box

Description

●Intel® Xeon® Processor Scalable Family
●6-Channel RDIMM/LRDIMM DDR4, 24 x DIMMs
●Dual 1Gb/s LAN ports (Intel® I350-AM2)
●1 x Dedicated management port
●26 x 2.5″ SATAIII hot-swappable HDD/SSD bays
●8 x PCIe Gen3 expansion slots
●2 x OCP Gen3 x16 mezzanine slots
●Aspeed® AST2500 remote management controller
●Dual 1200W 80 PLUS Platinum redundant power supply

Intel® Xeon® Scalable Processors – Extend Your Scale

This Intel Xeon Scalable product family provides a wealth of new options in scalability – across compute, network and storage – to deliver solutions for a range of applications.The GIGABYTE SERVER system design and engineering expertise has been applied to the Intel Xeon Scalable series to meet the increasingly diverse requirements of the industry, from entry-level HPC to large scale clusters.

Increased Memory Performance

– The CPU architecture allows for up to 6 memory channels per socket and a bandwidth of up to 2666MHz.

– The architecture is future-ready with the potential to support Apache Pass DIMM.

– Memory capacity benefits with up to available 12 DIMMs per socket, which represents a 50% generation-on-generation increase.

Innovative Storage, Security and Networking

*Storage

– Innovative storage options through Intel Optane™ low-latency, non-volatile design.

– These systems ship as standard with a Virtual Raid-On-CPU (VROC*) module to enable software raid on connected U.2 SSDs.

(* VROC is available by default on NVMe SKU)

– Support for SATA-DOM is available to allow for standalone boot and diagnostics direct through SATA connections on the board.

*Security

– Integrated QAT for improved compression and security with software. On the hardware side, extra encryption on-board is enabled by TPMs available from GIGABYTE.

*Networking

– Fully compatibale with Mellanox networking products.
Dimensions
2U

Motherboard
MR91-FS0

CPU
Intel Xeon Processor Scalable Family
Intel Xeon Platinum Processor, Intel Xeon Gold Processor, Intel Xeon Silver Processor and Intel Xeon Bronze Processor
CPU TDP up to 205W
(NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable)

Socket
2 x LGA 3647
Socket P0
Mounting pitch: Narrow ILM

Chipset
Intel C621 Express Chipset

Memory
24 x DIMM slots
DDR4 memory supported only
6-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 64GB supported
1.2V modules: 2666/2400/2133 MHz

LAN
2 x 1Gb/s LAN ports (Intel I350-AM2)
1 x 10/100/1000 management LAN

Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920×1200 at 60Hz 32bpp, DDR4 SDRAM

Audio
–

Storage
Front side: 24 x 2.5″ SATA/SAS hot-swappable HDD/SSD bays
Rear side: 2 x 2.5″ SATA/SAS hot-swappable HDD/SSD bays
LSI SAS35x36 expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
0 x SAS/SATA drives
SAS card is required to enable the drive bays

SATA
1 x 7-pin SATA III 6Gb/s with SATA DOM supported
By using pin_8 or external cable for power function

SAS
Supported via add-on SAS Card

RAID
Depends on RAID card

Peripheral Drives
–

Expansion Slots
Riser Card CRS2131:
– 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
– 1 x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
– 1 x PCIe x8 slots (Gen3 x8), Full height half-length
Riser Card CRS2132:
– 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
– 1 x PCIe x8 slots (Gen3 x0 or x8), Full height half-length
– 1 x PCIe x8 slots (Gen3 x8), Full height half-length
Riser Card CRS2124:
– 1 x PCIe x8 slots (Gen3 x0 or x8), Low profile half-length
– 1 x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length
2 x OCP mezzanine slots
– PCIe Gen3 x16
– Type1, P1, P2, P3, P4, K2, K3

Internal I/O
2 x Power supply connectors
4 x SlimSAS connectors
2 x SATA 7-pin connectors
2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
1 x VROC connector
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper

Front I/O
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs

Rear I/O
2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x RJ45
1 x MLAN
1 x ID button with LED

Backplane I/O
Front side_CBP20O2: 24 x SATA/SAS ports
Rear side_CBP2020: 2 x SATA/SAS ports
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port

TPM
1 x TPM header with LPC interface
Optional TPM2.0 kit: CTM000