Gigabyte Server R282-Z91 2U 24Bay AMD EPYC7002 24×2.5″ SATA-SAS hot-swappable

Description

• Dual AMD EPYC™ 7002 series processor family

• 8-Channel RDIMM/LRDIMM DDR4 per processor, 32 x DIMMs

• 2 x 1Gb/s LAN ports (Intel® I350-AM2)

• 1 x Dedicated management port

• Onboard 12Gb/s SAS expander

• 24 x 2.5″ SATA/SAS hot-swappable HDD/SSD bays in front side

• 2 x 2.5″ SATA/SAS hot-swappable HDD/SSD bays in rear side

• Ultra-Fast M.2 with PCIe Gen3 x4 interface

• 8 x PCIe Gen4 x16 and x8 expansion slots

• 1 x OCP 3.0 Gen4 x16 mezzanine slot

• 1 x OCP 2.0 Gen3 x8 mezzanine slot

• Aspeed® AST2500 remote management controller

• 1600W 80 PLUS Platinum redundant power supply

PCIe Gen 4.0 Ready

AMD EPYC Rome is ready to support PCIe Gen 4.0 with a bandwidth of 64GB/s, twice that of PCIe Gen 3.0. This doubles the bandwidth available from the CPU to peripheral devices such as graphics cards, storage devices and high speed network cards. GIGABYTE’s AMD EPYC 7002 Series server platforms are ready to be used with a new generation of PCIe Gen 4.0 devices such as AMD’s Radeon MI50 GPGPU.

Higher Memory Speed

AMD EPYC’s Rome 7002 Series processors feature faster 8 channel DDR4 memory lanes, supporting RDIMM or LRDIMM memory modules with a speed of up to 3200MHz (1 DIMM per channel)

Get the Memory Performance Edge

3200Mhz Even at 2 DIMMS Per Channel

On previous AMD server platforms, memory speed has been automatically downgraded by design when a user installed two DIMMs per channel. GIGABYTE has now developed a unique solution to overcome this performance downgrade headache: with our new 2nd Generation AMD EPYC 7002 Series server platforms, maximum memory speed (3200Mhz) is now supported even when using 2 DIMMS per channel*. GIGABYTE’s server platforms give you the performance edge, with more memory capacity at faster speeds than competing solutions!
2U
Motherboard
MZ92-FS0
CPU
AMD EPYC^TM 7002 series processor family
Dual processors, 7nm, Socket SP3
Up to 64-core, 128 threads per processor
TDP up to 225W, cTDP up to 240W
Fully support 280W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Compatible with AMD EPYC^TM 7001 series processor family
Chipset
System on Chip
Memory
32 x DIMM slots
DDR4 memory supported only
8-Channel memory per processor architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200/ 2933 MHz
– Note:
Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
LAN
2 x 1GbE LAN ports (1 x Intel I350-AM2)
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920×1200 at 60Hz 32bpp
Audio
–
Storage
Front side: 24 x 2.5″ SATA/SAS hot-swappable HDD/SSD bays, connected to SAS expander
Rear side: 2 x 2.5″ SATA/SAS hot-swappable HDD/SSD bays, connected to SAS expander
Broadcom SAS35x36R expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
0 x SAS/SATA drives
SAS card is required to enable the SAS drives
Suggested 12Gb/s SAS cards:
CRA4448
CRA3338
RAID
–
Peripheral Drives
–
Expansion Slots
Riser Card CRS2027:
– 1 x PCIe x8 slot (Gen4 x8), Low profile half-length
– 1 x PCIe x8 slot (Gen4 x8), Low profile half-length
Riser Card CRS2033:
– 1 x PCIe x16 slot (Gen4 x16), FHHL
– 1 x PCIe x8 slot (Gen4 x8), FHHL
– 1 x PCIe x8 slot (Gen4 x8), FHHL
Riser Card CRS2033:
– 1 x PCIe x16 slot (Gen4 x16), FHHL
– 1 x PCIe x8 slot (Gen4 x8), FHHL
– 1 x PCIe x8 slot (Gen4 x8), FHHL
1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0
Supported NCSI function
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth (Type1, P1, P2)
Supported NCSI function
1 x M.2 slot:
– M-key
– PCIe Gen3 x4
– Supports NGFF-2242/2260/2280/22110 cards
Internal I/O
1 x M.2 slot
1 x USB 3.0 header
1 x COM header
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs
Rear I/O
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane I/O
Front side_CBP20O5: 24 x SATA/SAS ports
Rear side_CBP2020: 2 x SATA/SAS ports
Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Power Supply
2 x 1600W redundant PSUs
80 PLUS Platinum
AC Input:
– 100-127V-/ 12A, 47-63Hz
– 200-240V-/ 9.48A, 47-63Hz
DC Output:
– Max 1000W/ 100-127V
+12V/ 82A
+12Vsb/ 2.1A
– Max 1600W/ 200-240V
+12V/ 132A
+12Vsb/ 2.1A