Gigabyte Server S451-Z30 4U 36-Bay Single AMD Processors Storage Server Brown Box

Description

• Single AMD EPYC™ 7000 series processor family

• 8-Channel RDIMM/LRDIMM DDR4, 16 x DIMMs

• 2 x SFP+ 10Gb/s LAN ports (Broadcom® BCM 57810S)

• 1 x dedicated management port

• 36 x 3.5″ SATA/SAS hot-swap HDD/ SSD bays

• 2 x 2.5″ SATA hot-swap HDD/SSD for booting device

• SAS expander with 12Gb/s transfer speed

• Ultra-Fast M.2 with PCIe Gen3 x4 interface

• Up to 4 x PCIe Gen3 x16 slots and 3 x PCIe Gen3 x8 slots

• Aspeed® AST2500 remote management controller

• Dual 1200W 80 PLUS Platinum redundant power supply

• Optimized performance with Mellanox Infiniband EDR and Ethernet 100G products

The New x86 Option

AMD’s return to the CPU segment delivers a whole new value proposition to the x86 world. Built on GIGABYTE’s extensive design expertise across a range of chipset platforms, this AMD EPYC™ platform is already receiving acclaim for its high specification:

• Memory

• I/O

• Network connectivity

This platform is intended as an alternative for builders in the x86 space and packs a real punch in flexibility and expansion options.

• Memory Optimization

Memory speed of up to 2666MHz (at 1DPC)

Total memory capacity of 2TB supported

• PCIe Lanes

Up to 128 lanes in both 1P and 2P offerings providing the highest expandability options of any x86 platform

• Cores / Power

CPU power is managed at the core level, meaning that power is allocated only for specific workload needs

• Security

Proprietary AMD security on chip

Comprehensive I/O

Easy, Flexible & Powerful Storage Deployment

S451-Z30 Block Diagram

High-Speed Networking
Dimensions (WxHxD, mm)
4U
Motherboard
MZ31-AR0
CPU
AMD EPYC^TM 7000 series processor family
Single processor, 14nm
Up to 32-core, 64 threads
TDP up to 180W
Socket
Socket SP3
Chipset
System on Chip
Memory
16 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: 2666(1DPC)/2400/2133 MHz
– Note:
Memory speed run at 2133MHz when 1R/2R memory modules are fully populated
LAN
2 x SFP+ 10Gb/s LAN ports (Broadcom BCM 57810S)
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920×1200 at 60Hz 32bpp, DDR4 SDRAM
Audio
–
Storage
Front side: 24 x 3.5″ SATA/SAS hot-swappable HDD/SSD bays
Rear side: 12 x 3.5″ SATA/SAS and 2 x 2.5″ hot-swappable HDD/SSD bays
2.5″ SATA HDD/SSD supported
2 x Broadcom SAS3x36R expanders
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
0 x SAS/SATA drives
SAS card is required to enable the drive bays
Suggested 12Gb/s SAS cards:
CRA4648
CSA4648
SATA
–
SAS
Depends on SAS add-on Card
RAID
Depends on SAS add-on Card
Peripheral Drives
–
Expansion Slots
Slot_7: 1 x PCIe x8 (Gen3 x8 bus) slot
Slot_6: 1 x PCIe x16 (Gen3 x16 bus) slot
Slot_5: 1 x PCIe x16 (Gen3 x8 bus) slot
Slot_4: 1 x PCIe x16 (Gen3 x16 bus) slot
Slot_3: 1 x PCIe x16 (Gen3 x16 bus) slot
Slot_2: 1 x PCIe x8 (Gen3 x8 bus) slot
Slot_1: 1 x PCIe x16 (Gen3 x16 bus) slot
1 x M.2 slot:
– M-key
– PCIe Gen3 x4
– Supports NGFF-2242/2260/2280 cards
Internal I/O
1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
4 x SlimSAS connectors
1 x M.2 slot
2 x CPU fan headers
5 x System fan headers
1 x USB 3.0 header
1 x USB 2.0 header
1 x COM_2 header
1 x TPM header
1 x Front panel header
2 x LAN activity LED
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
1 x Buzzer
Front I/O
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x System status LED
2 x LAN activity LEDs
Rear I/O
2 x USB 3.0
1 x VGA
2 x SFP+
2 x RJ45
1 x MLAN
1 x ID button with LED
2 x LAN activity LEDs
Backplane I/O
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Power Supply
2 x 1200W redundant PSUs
80 PLUS Platinum
AC Input:
– 100-240V-/ 12-7A, 50-60Hz
DC Input:
– 240Vdc/ 6A
DC Output:
– Max 1000W/ 100-240V-
+12V/ 80.5A
+12Vsb/ 3A
– Max 1200W/ 200-240V- or 240Vdc input
+12V/ 97A
+12Vsb/ 3A